btolle2017-05-04T16:05:05+00:00November 4th, 2015|Tags: arduino, lanc|
So, as I wait for the camera to arrive, I have been refining the control setup.
I got it to work with wires, made the PS3 controller drive it over USB. Then I got rid of most of the wires and got LANC working, triggered off of the USB controller. The circuit
btolle2017-05-04T16:24:26+00:00October 29th, 2015|Tags: arduino, lanc, pcb|
I haven’t dallied with electronics since high school. I soldered robot kits, and light sensitive buzzers. One summer I played with etching my own circuits. I couldn’t draft or silkscreen the boards, and I ended up drawing them with graph paper and a magic marker. The etching chemicals were toxic, and the experiment was short
btolle2017-05-04T16:23:06+00:00October 28th, 2015|Tags: arduino, lanc|
While I wait for the camera to ship, I have been playing with making the LANC control work.
I found lots of very helpful posts:
I’ve been able to cobble together a simple circuit, and mix the
btolle2017-05-04T16:30:02+00:00October 19th, 2015|Tags: arduino, bmmcc, lanc, pwm|
I have always wanted to be able to control a camera’s settings with midi. The ability to adjust any setting – iris, focus, zoom, gain – to match a beat or just to have a repeatable combination of effects.
When the Blackmagic Micro Cinema Camera was announced, it seemed like it might
