btolle2018-07-10T21:52:21-07:00July 10th, 2018|Tags: arduino, bmmcc, pcb, robot, wifi|
The adafruit Feather M0 WiFi arduino board has turned out to be the perfect board for the Master Control Panel. There are many pre-made ‘wings’ that can connect together through a common set of pins, including the OLED screen on the top of the MCP, and the servo controller.
Since the board diagrams
btolle2017-05-04T16:24:26-07:00October 29th, 2015|Tags: arduino, lanc, pcb|
I haven’t dallied with electronics since high school. I soldered robot kits, and light sensitive buzzers. One summer I played with etching my own circuits. I couldn’t draft or silkscreen the boards, and I ended up drawing them with graph paper and a magic marker. The etching chemicals were toxic, and the experiment was short
