btolle2018-07-10T23:33:24-07:00July 10th, 2018|Tags: arduino, bluetooth, bmmcc, OSC, TouchDesigner099, TouchOSC, wifi|
The name for the Master Control Panel was inspired by the Master Control Program in the original Tron film. It can’t really control anything, it is more of a “WiFi OSC Router”, but it’s hard to get excited about 3D-printing that, so, it’s the MCP.
To CONTROL the MCP, there seems to be
btolle2018-07-10T21:52:21-07:00July 10th, 2018|Tags: arduino, bmmcc, pcb, robot, wifi|
The adafruit Feather M0 WiFi arduino board has turned out to be the perfect board for the Master Control Panel. There are many pre-made ‘wings’ that can connect together through a common set of pins, including the OLED screen on the top of the MCP, and the servo controller.
Since the board diagrams
btolle2018-07-10T21:48:20-07:00July 10th, 2018|Tags: 3D Printing, arduino, blender, bmmcc, robot, shapeways, wifi|
The case for the Master Control Panel could have been a cardboard box and duct tape, but that wouldn’t be robust enough to handle an on-set environment.
So, I 3D printed a case out of nylon and aluminum, from Shapeways. It is light, and flexible, and strong. I was able to download digital models of
btolle2018-07-10T20:23:17-07:00July 6th, 2018|Tags: arduino, bmmcc, robot, wifi|
This camera robot thing became way too complicated.
I had gotten all of the individual pieces working, thinking that the whole thing would come together piece by piece. As started drawing diagrams of the wiring, it quickly became apparent that I would have to minimize the wires. I want the bot to have complete freedom of
btolle2018-02-09T03:17:06-07:00February 9th, 2018|Tags: arduino, bmmcc, OSC, robot, s-bus, wifi|
It’s been more than a year since I first set out to make the camera move around in a repeatable way. Sure, I was busy with another Chinese action movie, and life and such, but mostly it’s taken this long because building a robot is hard.
I knew it was going to involve challenges, but I
btolle2017-05-04T16:11:19-07:00January 21st, 2017|Tags: arduino, blender, bmmcc, OSC, robot, wifi|
Now that I am able to control the camera, I was able to get back to the automation goal. I originally set out to AUTOMATE the camera, but I was just thinking of the camera controls – focus, iris, f-stop. And then, I figured that if I was going to automate the camera in a
btolle2017-05-04T16:13:53-07:00November 12th, 2015|Tags: arduino, wifi|
Yet another delay in the camera shipment date. And, because I’m an optimistic fool, I returned the cheap-ass on-camera monitor I’d gotten, and back-ordered the on-camera monitor from the same company the camera is back-ordered from. At this rate the camera and monitor will ship in January.
As I wait, I forge on with the next phase of the camera
